How can we fly smoothly with three projectors in MSFS2020? Without the latest graphics card and without becoming an expert in performance optimisation? Is that even possible? In the video, we test three tools that are easy to use and can be utilised ...

During computer maintenance and when we want to try something out, we usually have our projectors switched off to save power and wear and tear. However, since switching our visual system to the new projectors, we have had an annoying problem. If the ...

Today's flight takes us from Dresden to Vienna. We want to visit our customer and friend Wolfgang, who has realised an impressive project at his home. When we landed in Vienna, we noticed something unusual that we will have to think about over t...

This fantastic customer project is located in a private house in Vienna. It's great that we can show you pictures. Wolfgang has practically built a private, fully equipped simulator centre in his basement! With a cosily furnished briefing room a...

After flying in an FFS, the dream of having a cockpit of my own was there. The home cockpit project began in February 2016 with an initial email to Christian. It quickly became clear that VIER IM POTT was exactly the right partner for such a pro...

During the last days we have replaced the eight year old visual of our A320 flight simulator with a new 4K projection system. This is our first test flight. Ladies and Gentlemen, please fasten your seat belts! We take-off for a first f...

Warping is the most demanding part of the conversion in terms of software. We use Immersive Designer Pro for planning with our customers because it is easy to calculate various scenarios in advance. This software is usually too expensive and too diff...

New day. Firstly, we prepare the installation of the projectors. To do this, we first fit the projector holders to the projectors. Then the first projector is mounted. One thing we can say in advance. The overhead work left us with sore muscles the n...

The preparations have been finalised. We have bought three new projectors. Optoma with 4K resolution. You have to realise that we have a very special installation situation in Bottrop. Like many others, we have space problems in the showroom. That's ...

We fly (virtually, of course) from Finkenwerder to Dresden to prepare the next project. But first we enjoy the beautiful winter weather. Clear air, good visibility and a route that more or less always runs straight ahead. In the meantime, my wife Sil...

Installation Installing the Microsoft Flight Simulator MSFS2020 is relatively simple. We decided to stream the scenery via the internet, which is no problem if you have a reasonably good internet bandwidth. There are a few points to bear in mind...

We are a little excited. Today we're off on our first flight around the world. Our destination today is Finkenwerder. Hamburg-Finkenwerder airfield (IATA code: XFW, ICAO code: EDHI) is a special airfield in the south-west of Hamburg and part of the A...

Flying is incredibly exciting and there are many fascinating places to go. We will fly eastwards in the A320 until we arrive back at our starting point. The flight distances will be around one hour per leg - where feasible. Fly with us...

We're delighted to announce that VIER IM POTT, a leading provider of high-quality flight simulators, has formed a strategic partnership with SimVIS, a distinguished specialist in high quality visualisation solutions. This alliance paves the way for u...

Here's a short video from our new customer Marcus. He took off on his first night flight with an expert and we were able to join him on YouTube. The complete installation has recently been completed and VATSIM is already up and running...

Today we are celebrating a very special milestone in our company's history - our 10th anniversary. It feels like yesterday that we started out as a small, naive and enthusiastic group. We had nothing except our enthusiasm for flight simulation c...

We are specialists for the A320, but this does not mean that we have only one product. On the contrary. We have more than 200 different individual products that can be put together according to need and desire.To make it easier to get started, we off...

Initial situation Installed ProSimADIRS are alignedArtificial horizon is not active (red markers) Solution Please make the appropriate settings in ProSimSystem | Combined config:

We have added a new feature to our product offering. The intercom system is already a central part of the communication system. On the one hand of course for ATC and corresponding services like VATSIM or IVAO. But also for the communication between t...

Today we want to introduce you to a really cool project that Jean from DLR has implemented for his in-house training programme. It is supposed to give the possibility to communicate with the simulated air traffic control from the cockpit. For this pu...