Why my co-pilot sees the world differently to me!

In flight simulation, the environment is usually transmitted via a screen or TV monitors. This creates a physical effect. What is straight for one pilot is crooked for another. The pilot steers the aircraft in a dead straight line on the taxiway and the co-pilot throws up his hands in disbelief. 

Why is that? The effect is created by the pilot and co-pilot looking at the projection screen from different angles

How strong is the effect in practice?

The effect is greater the smaller the distance to the screen and the smaller the diameter:

Projection Area with 4.0m diameter. 

Projection Area with 5.0m diameter. 

Projection Area with 8.0m diameter. 

The effect is particularly pronounced with TV monitors, as these are usually positioned very close to the cockpit for space reasons. If three monitors are used, a lot of thought should be given in advance to what the lines of sight will look like. In this example, the line of sight - and therefore the runway(!) - would be exactly at the edges of the monitor.

What can you do about it?

By the way, an oversized screen is usually not the answer. From a certain distance, the required height of the screen becomes a problem. The simulator must be placed on a platform. There are also a whole series of other problems.

If you have the space for it, you are well advised to use the largest possible screen. However, if you don't have the space, you don't need to worry either.

Switchable Views for CPT and F/O

The solution is to have two switchable views that are switched to the respective Pilot Flying (PF).

How can I switch views? There are several options. We have tried two in practice. FergoCam https://cockpit.fergonez.net/. This tool is incredibly easy to use, but currently only works with Prepar3D.

In MSFS2020 we have made the appropriate settings in camera.cfg. Essentially, it's about the values of InitialXyz and InitialPbh. You can find very good tutorials for this on Google.

Te best way to evaluate the correct values for the camera settings is by trial and error. Place the aircraft on the runway and then find the correct values by trying out different options. For you orientation. The runway centerline should be between PFD and ND.

How do the professionals do it?

Of course, even professionals can't change the laws of physics. But they have a little more resources than we do. :-) The answer is called Colimated Display.

Technical Background

During our research on the subject, we came to the conclusion that the term "parallax effect" is not being used correctly in our context.
According to the definition, the parallax effect influences the depiction of the surroundings from the cockpit in order to convey a realistic feeling of speed and distance. It is created by different speeds of movement of the elements in the scenery.

Nearby objects move faster than distant ones, which is simulated by the animation of different levels in the simulator. This reinforces the illusion of spatial depth and improves the realism of the simulator experience.

So far so similar. But we don't know of a better term.
Step by step to the finished cockpit
Performance Optimization - MSFS2020 with 3 Project...
 

Kommentare 2

Gäste - Jose am Montag, 22. April 2024 19:21

Have you guys ever tested two smaller TVs for the front view? Two 50” or 55” tvs. I think maybe that would help with this. I have a large tv in front and I’m thinking of changing to two, if you have any experience on that I’ll take some advice. Thanks

Have you guys ever tested two smaller TVs for the front view? Two 50” or 55” tvs. I think maybe that would help with this. I have a large tv in front and I’m thinking of changing to two, if you have any experience on that I’ll take some advice. Thanks
Christian Behne am Mittwoch, 24. April 2024 10:09

Honestly, no. But maybe it helps if you check the drawings above and try to create/paint your scenario yourself? Then you can maybe optimize screen positions to ensure you have the runway in the correct angle without any disturbing monitor frames.

Honestly, no. But maybe it helps if you check the drawings above and try to create/paint your scenario yourself? Then you can maybe optimize screen positions to ensure you have the runway in the correct angle without any disturbing monitor frames.
Montag, 13. Mai 2024

Stay informed

We will be happy to inform you about news.

Unternehmen

VIER IM POTT 
Jähne GmbH für Produktinnovation
Freiberger Straße 114, 01159 Dresden
Deutschland

Telefon: 0351 4116349
E-Mail: cockpit@vier-im-pott.com
Öffnungszeiten: Mo - Fr 08:00 - 17:00

Showroom

Unser Showroom in Bottrop, NRW ist für Privat- und Geschäftskunden geöffnet. Wir freuen uns auf Ihren Besuch.

Zum Testen unserer Produkte vereinbaren Sie bitte einen Termin.

Social Media

Die Produkte von VIER IM POTT und SKALARKI ELECTRONICS sind in keiner Weise mit den Flugzeugherstellern verbunden oder werden von ihnen unterstützt. Unsere Simulationsprodukte sind keine Originalteile der Flugzeughersteller und können nicht für professionelles Flugtraining verwendet werden. Sie ähneln funktionell den echten Teilen, die jedoch nicht in einem echten Flugzeug verwendet werden können. Sie dürfen nur zu Simulationszwecken verwendet werden.

Wir bemühen uns innerhalb von 24 h zu antworten.