Warping Guide
Overview
Warping is used to create a continuous image across several projectors without recognisable transitions. To achieve this, the projectors are installed with a certain amount of overlap. The rest is done by special software.
We recommend Immersive Display Pro from Fly Elise for this purpose.
These instructions apply only to Cockpit Builder simulators. Premium Plug & Fly Simulators are already configured so that you only need to plug the according cable.
Which product do I need?
For a professional setup you need Immersive Display Pro in the version Ultimate.
We strongly recommend the version with a dongle, otherwise you will have to buy a new version in the event of a hardware change or defect!
Installation instructions
Fly Elise is continuously developing its software. We would therefore like to take this opportunity to refer you to the instructions on the Fly Elise website.
Please read the instructions carefully and, if necessary, several times. Installation is basically very simple once you have understood how to do it!